Arista Switch Configure |VLANs, LACP, management IP, trunk port, and RSTP| AI Study

 Here is an example of how to configure an Arista switch including VLANs, LACP, management IP, trunk port, and RSTP:

* Create VLANs

switch(config)#vlan 10 switch(config-vlan)#name VLAN_10 switch(config-vlan)#vlan 20 switch(config-vlan)#name VLAN_20

*Configure LACP
switch(config)#interface ethernet 1/1 switch(config-if)#channel-group 1 mode active switch(config)#interface ethernet 1/2 switch(config-if)#channel-group 1 mode active

* Configure MGMT IP
switch(config)#interface management 1 switch(config-if)#ip address 192.168.1.100/24

*Configure Trunk Port

switch(config)#interface ethernet 1/3 switch(config-if)#switchport mode trunk switch(config-if)#switchport trunk allowed vlan add 10,20

*Configure RSTP
switch(config)#spanning-tree mode rapid-pvst

Please note that this is a simplified example and may not include all necessary steps for a real-world deployment. It is recommended to consult the Arista switch documentation for detailed instructions and best practices.




Comments

Post a Comment

Popular posts from this blog

Advance BGP Configure | Cisco Router | AI Study

  Here is an example of a more advanced BGP configuration for a Cisco router that includes the use of path prepend, multi-exit discriminator (MED) weight attribute, and inbound and outbound policies: router bgp 100 bgp log-neighbor-changes no synchronization network 10.0 .0 .0 mask 255.0 .0 .0 network 10.1 .1 .0 mask 255.255 .255 .0 neighbor 10.1 .1 .2 remote- as 200 neighbor 10.1 .1 .2 update-source Vlan1 neighbor 10.1 .1 .2 next -hop-self neighbor 10.1 .1 .2 soft-reconfiguration inbound neighbor 10.1 .1 .2 route- map bgp- in in neighbor 10.1 .1 .2 route- map bgp-out out neighbor 10.1 .1 .2 weight 100 neighbor 10.1 .1 .2 prefix- list p2p- filter in route- map bgp- in permit 10 match as -path 100 set local-preference 200 route- map bgp-out permit 10 match ip address prefix- list p2p- filter set as -path prepend 100 100 set med 100 prefix- list p2p- filter seq 5 permit 10.1 .1 .0 / 24 This configuration ...
Read more

AI tips and tricks for a support engineer

  Here are a few tips and tricks that can be helpful for a support engineer: Keep your knowledge up-to-date: Regularly update your knowledge of the products and services you support by reading technical documentation, participating in training, and staying current with industry developments. Be organized: Keep track of your open cases, and use a system to manage and prioritize them. Be patient: Be patient and empathetic with customers, and take the time to understand their issues and concerns. Be a good listener: Actively listen to customers and ask clarifying questions to fully understand their issues. Communicate effectively: Communicate clearly and effectively with customers and other team members, and provide regular updates on case progress. Be proactive: Look for ways to improve your processes and the customer experience. Be a team player: Collaborate with other team members to share knowledge and resolve complex issues. Keep records: Keep accurate records of all interactions...
Read more